PS-350SFR Has The Following
Connectors: Place Cursor Over Image for More Info
& Color Image
1 Each
20/24 Pin
ATX Power
4 Each
4 Pin Peripheral
or 5.25 Drive
1 Each
4 Pin Floppy or
3.5 Drive
1 Each
Pentium 4
ATX12V
1 Each Serial ATA
SATA HDD
NOTE: This unit is wired with the connectors above. Your power supply may not have all of these connectors. In that case, the unused
connectors can be tied off with no problem. The important thing is to
ensure that this unit has at least the connectors that are connected to your
motherboard and peripherals with one exception. If the original has a
P7, P9 or FAN/C 3 Pin connector...no problem. The replacement unit
operates without this connector and it is not supplied.
APPLICATION NOTE: FOR HP MODELS ONLY!! (1)
The original unit on
some
models may
have a P7, P9 or FAN/C
3 pin power supply fan connector. The replacement unit has
built-in fan control and does not need this connector.
(2)The original unit on
some
models may
have a P8 4 Pin Video Power Connector. In most cases the
P8
power connector is not connected to anything and this power
supply WILL WORK.
HOWEVER,
IF THE P8 CONNECTOR IS CONNECTED TO ANYTHING INSIDE YOUR
COMPUTER, you will need to order the original HP power supply.
BRAND NEW BETTER QUALITY
AND HIGHER WATTAGE REPLACEMENT FOR
Compaq Spare
Numbers 189901-001.
Note: This is a substitute for the Compaq
189901-001 Power Supply.
(1)
The original unit on
some
models may
have a P7, P9 or FAN/C
3 pin power supply fan connector. The replacement unit has
built-in fan control and does not need this connector.
(2)The original unit on
some
models may
have a P8 4 Pin Video Power Connector. In most cases the
P8
power connector is not connected to anything and this power
supply WILL WORK.